Hand protection seriesFace protection seriesBody protection seriesOther medical consumables
MEDICAL INFUSION STICKER
Made of three parts, namely base fabric, infusion sticking core (absorbing pad)and separation layer, and sterilized by epoxy ethane?
Hotline: +86-0791-85352308 / 85352311
Details


[Main structure, performance]

This product is made of protective base fabric, infusion core and isolation layer as raw materials, and is made by non-woven coating, laminating, slitting, infusion machine, packaging and sealing, ethylene oxide sterilization, and finished product inspection.

New: This product is composed of three parts: base fabric, transfusion core (absorbent pad) and isolation layer.

[Instructions]

When using, open the package, take out the infusion patch, remove the anti-adhesive paper on the surface, and align the core of the adhesive layer with the core at the needle, so that the adhesive surface is flat on the skin around the wound after routine disinfection, and take a few more Just fix the infusion hose.

[Scope of application]

This product is used for fixation and wound care during infusion in medical departments

[Contraindications, precautions, warnings and reminders]

·This product is sterilized by ethylene oxide, the product is sterile, and the validity period is two years.

·Single use, disabled if the package is damaged. Dispose of it as medical waste after use, so as not to affect the environment.

Storage: It should be stored in a well-ventilated room with a relative humidity of no more than 80%, no corrosive substances, and good ventilation.

  • Previous Article:No Record
  • Next Article:No Record